Set up your Crankstop
All the steps in video:
- Remove your crank set and clean the axle
- Remove your bottom bracket and clean it. If there is any plastic part in between the BB sides, remove it.
- Grease the BB threads with copper or Teflon grease.
- Choose the Crankstop strength by adding or removing internal o-rings. Grease the internal o-rings with bearing or lithium grease.
- Put the Crankstop on the left BB side, then put it back on the bike.
- Screw the right side back on the bike.
- Grease the crank axle.
- Put the crank set back on the bike.